Steel Protection

There are many applications in construction, mining, transport or civil industries where steel assets require protection.

There are many applications in construction, mining, transport or civil industries where steel assets require protection. Usually these are steel assets which endure extreme conditions, whether that is high abrasion and impact, chemical attack or permanent immersion. Protecting these steel assets correctly avoids corrosion, protects contents (in the case of permanent immersion) and extends the life of the steel.

Understanding corrosion: The corrosion of structural steel is an electrochemical process requiring the presence of both moisture and oxygen. If either are absent, corrosion does not occur. Essentially, the iron in the steel is oxidised to produce rust, which occupies about 6 times the volume of the original material which is consumed in the rusting process.

Civilox is a great primer for steel provided it is blasted properly before hand. Alternatively Tufflon adheres to steel with vice-like grip alone, without the need for priming. This technique requires that the steel is blasted immediately prior, before flash rust has the chance to form.

Related Applications

Related News

Key Takeaways Liquimix supplies closed-cell polyurethane spray foam systems in Australia, plus the Graco equipment to apply them. We also offer equipment hire and workshop servicing. Closed-cell foam is the usual choice for cold storage and industrial pipe insulation because it’s rigid and moisture-resistant. It also insulates more per millimetre

Key Takeaways A sunken concrete slab can be lifted and levelled without removal by injecting expanding polyurethane foam through small holes. Foam jacking is lighter and less invasive than mudjacking, and it reacts within seconds. Liquimix manufactures slab lifting foam in Australia and supplies it to professional applicators. Sunken concrete

Key Takeaways To stop water leaking through cracks in a basement car park, inject the cracks with a hydrophilic polyurethane resin. The CrackShot 150, for example, reacts with water to create the perfect seal, even while it’s still leaking. Use epoxy injection for dry, structural cracks instead. The right choice

Key Takeaways The best waterproof coating for a flat concrete roof is a UV-stable, liquid-applied membrane, typically polyurethane or a polyurea hybrid. It forms a seamless layer with no joints, preventing leaks. Trafficable systems (pedestrian-friendly surfaces for walking) suit rooftop terraces, and lifespan depends on UV exposure, membrane thickness, ponding