A garage floor needs to do more than simply look good.
It needs to withstand vehicles, foot traffic, tools, dirt, oil, everyday spills and the general wear that comes with a busy garage or workshop. At the same time, many Australian homeowners and property owners want a garage floor that is easy to clean, visually appealing and capable of giving an ordinary concrete slab a professional finish.
This is where a properly specified garage epoxy flooring system can make a difference.
Rather than treating garage flooring as simply a single coat of paint, a complete flooring system uses multiple products, with each layer performing a specific role.
For a professional epoxy garage floor, Liquimix recommends a system built around four key stages:
For the system discussed in this guide, the recommended coverage rates are:
| System Component | Recommended Coverage |
|---|---|
| Aralox FL170 Primer | 4 m² per L |
| Aralox Premium Base | 5 m² per L |
| Torginol Flakes | 3.5 m² per kg |
| Aralox SL Clear | 6 m² per L |
This four-stage approach creates more than a decorative finish. It provides a structured epoxy flooring system for garages where preparation, adhesion, appearance and protection all work together.
Concrete is a common choice for Australian garages, but bare concrete can become stained, dusty and difficult to maintain over time.
Oil, grease, tyre marks, dirt and other contaminants can penetrate or stain an uncoated concrete surface. Small imperfections can also become more noticeable as the floor ages.
A professionally installed garage floor coating can transform the appearance and functionality of the space.
A properly designed epoxy flooring system can provide:
Liquimix describes its garage epoxy solutions as suitable for environments exposed to vehicle loads, foot traffic and spills, while also highlighting flake flooring as an option for customising the appearance of the floor.
For homeowners, this can turn a basic garage into a cleaner and more finished-looking part of the property. For flooring contractors and applicators, a complete system provides a structured approach that can be specified according to the project requirements.
The first stage of the system is the Aralox FL170 primer.
For this garage flooring system, the recommended coverage rate supplied for the project is:
4 m² per litre
The primer is an important part of the flooring system because the performance of subsequent coatings depends heavily on the condition and preparation of the concrete underneath.
Before applying the primer, the concrete should be properly prepared. The surface should be clean, sound and free from contaminants such as oil, grease, dust and other materials that could interfere with adhesion.
Surface preparation is one of the most important parts of any concrete garage floor coating project. Liquimix also emphasises preparation as part of its broader “Prepare, Prime, Protect” approach for coating applicators.
Depending on the condition of the concrete, mechanical preparation such as diamond grinding may be appropriate. Liquimix notes that grinding is often preferred over acid etching for stronger adhesion, particularly on larger commercial applications.
Aralox FL170 is a 100% solids epoxy system and is listed for applications including residential garage floors and internal flake flooring. Its current product information also describes high chemical and impact resistance and a solvent-free formulation.
A garage floor system is only as strong as its foundation.
Applying the primer correctly helps establish the first coating layer before the base coat and decorative flakes are installed.
For applicators, this stage is also where substrate condition should be assessed carefully. Cracks, holes, weak concrete, contamination or moisture-related issues should be addressed according to the project specification and product requirements before continuing.
Once the primer stage has been completed according to the system requirements, the next layer is Aralox Premium.
For this garage system, the recommended coverage is:
5 m² per litre
The base coat provides the main coloured surface beneath the decorative flakes.
This is an important part of a flake epoxy flooring system because the base colour can influence the final appearance of the finished floor.
The base coat should be applied evenly across the prepared surface before the flake broadcast stage.
For applicators, consistent application is important. Uneven material distribution can affect both the appearance and performance of the finished coating.
The objective is to create a consistent wet base that allows the Torginol flakes to be broadcast while the coating is at the appropriate stage for application.
This is where the garage floor begins to take on its distinctive decorative appearance.
Torginol flakes are broadcast into the wet epoxy base coat.
For this system, the recommended coverage is:
3.5 m² per kg
Liquimix currently stocks Torginol flakes in different options, including vinyl and acrylic flakes. The company describes its flakes as polymer paint aggregates designed to enhance both the aesthetic and ergonomic qualities of resinous flooring systems.
The flakes can be selected in different colours and sizes to create different visual effects.
A flake system can provide several advantages from a design and practical perspective.
It can:
Liquimix recommends broadcasting the flakes into the epoxy or polyaspartic base coat, removing unbonded flakes and then sealing the system with a suitable clear topcoat.
The amount and distribution of flakes can influence the appearance of the finished garage floor.
Applicators can discuss the desired finish with the customer before beginning the installation.
For a professional project, it is important to follow the specified application method, product requirements and desired coverage rather than simply adding flakes randomly.
After the flake stage, the final component of this system is Aralox SL Clear.
For this garage system, the recommended coverage rate is:
6 m² per litre
The clear coat is an important part of a flake flooring system because it helps encapsulate and protect the decorative flakes while creating the final surface finish.
Liquimix’s flake flooring guidance recommends sandwiching the flakes with a suitable clear topcoat to provide protection and easier ongoing maintenance.
The result is a seamless decorative surface that combines the coloured base coat, decorative flakes and clear protective layer.
This final stage is particularly important because the customer is not simply buying a decorative floor. They are investing in a complete garage floor coating system designed for regular use.
One of the most useful parts of specifying a garage epoxy flooring system is calculating the approximate material requirement based on the floor area.
Using the coverage rates provided for this Liquimix system:
Aralox FL170 Primer
20 m² ÷ 4 m²/L = 5 L
Aralox Premium Base
20 m² ÷ 5 m²/L = 4 L
Torginol Flakes
20 m² ÷ 3.5 m²/kg = 5.71 kg
Aralox SL Clear
20 m² ÷ 6 m²/L = 3.33 L
Therefore, a 20 m² garage would require approximately:
These are theoretical quantities based on the stated coverage rates. Actual consumption can vary depending on concrete profile, porosity, surface condition, application method, film thickness, wastage and site conditions.
Applicators should always confirm quantities against the current technical data sheets and the actual project specification before ordering materials.
Even the best epoxy floor coating cannot compensate for poor surface preparation.
Before applying a garage epoxy system, the concrete should be assessed and prepared appropriately.
Common preparation considerations include:
Oil, grease, dirt, dust and other contaminants can interfere with coating adhesion.
Cracks, holes, damaged areas and other defects should be assessed and repaired using an appropriate repair system where required.
The surface needs an appropriate profile so the coating system can achieve the required mechanical bond.
Moisture, humidity, substrate temperature and dew point can affect coating application and curing.
A garage in Australia can serve many purposes.
It might be used for:
This means the flooring needs to suit the intended environment.
A decorative flake system can provide a practical option when the customer wants both garage floor protection and an attractive finish.
For homeowners, the finished floor can give the garage a cleaner and more finished appearance.
For professional flooring applicators, the system provides a repeatable sequence:
Prepare → Prime → Base → Flake → Clear
One of the most important things to understand about professional epoxy garage flooring is that the finished result is not simply about the product used.
It is about how the complete system works together.
The primer provides the foundation.
The base coat provides the main coloured surface.
The flakes provide the decorative finish.
The clear coat protects and encapsulates the system.
Each layer has a purpose.
This approach is different from simply applying a single coat of floor paint over untreated concrete.
Liquimix offers a broader range of flooring systems, including solid epoxy, solid polyurethane and flake flooring systems, allowing the coating specification to be matched to the project requirements.
For Australian flooring applicators, having access to a complete system can simplify project planning.
Instead of sourcing the primer, base coat, decorative flakes and clear coat from different suppliers, a coordinated system allows the applicator to build the floor around compatible products and a defined application sequence.
Liquimix supplies epoxy flooring products and other coating technologies to contractors and flooring professionals across Australia. Its product range includes Aralox epoxy systems, Torginol flakes and other flooring solutions.
For applicators considering a new garage epoxy flooring system, the key is to consider more than just the colour or final appearance.
The system should be selected based on:
The correct system specification can then be matched to the particular garage or workshop environment.
A high-quality garage floor starts long before the final clear coat is applied.
The foundation is proper concrete preparation. From there, each layer contributes to the final result.
The Liquimix garage system outlined in this guide uses:
1. Aralox FL170 Primer – 4 m²/L
2. Aralox Premium Base – 5 m²/L
3. Torginol Flakes – 3.5 m²/kg
4. Aralox SL Clear – 6 m²/L
Together, these components create a decorative epoxy flake flooring system designed for garages and other suitable concrete flooring applications.
For Australian homeowners looking to upgrade an ordinary concrete garage floor, the system offers a way to combine appearance with a professional coating approach.
For flooring applicators, it provides a structured system that can be measured, specified and applied according to the requirements of each project.
If you’re planning a garage epoxy flooring project in Australia, the first step is to assess the concrete, determine the required floor area and select the appropriate coating system for the expected traffic and conditions.
Ready to Upgrade Your Garage Floor?
Explore the Liquimix garage flooring system and find the right products for your next project.
Contact us
"*" indicates required fields
