Tufflon-D60

This extra hard (62 Shore D) pure polyurea can be applied directly to blasted steel without the need for priming. Due to its internal strength and proprietary adhesion promoters, Tufflon-D60 exhibits extraordinary strength and high adhesion of 14 MPa to prepared steel. With superior protection against wear & corrosion and nearly 200% elongation.

Tufflon-D60

$826.20

Request A Quote

"*" indicates required fields

Name*

TUFFLON-D60 DIRECT TO STEEL PURE POLYUREA

Direct To Steel Application Mining, Transport, Offshore Pylons And Marine

Tufflon-D60 will accommodate movement in steel or aluminium substrates without cracking, debonding or flaking. It is also ideal for protecting concrete floors in warehouses from pallets with protruding nails that would rip and tear softer polyurea products.

Tufflon-D60 premium pure polyurea should be the product of choice by engineers and project leaders for protecting expensive steel & aluminium assets such as heavy transport tippers, rail cars, ocean pylons, pipelines and many other applications.

Tufflon-D60SL variation incorporates a slip additive to help facilitate the early release of bulk dry and slurry loads in road and rail tippers. See separate TDS below.

Video below of Hydraulic Pull-off test showing 14 MPa adhesion of Tufflon-D60 to Steel.

SIZES AVAILABLE
425kg DRUM SET
42.5kg PAIL SET

APPLICATIONS FOR Tufflon-D60

  • Pipeline protection for mining and gas operations
  • Heavy vehicle tipper, rail car and marine linings – resists abrasion, corrosion and impact
  • Protecting steel mining assets against wear and corrosion
  • Ute linings
  • Steel castings for mining applications

Need a custom colour?

As one of the only local manufacturers of Construction Chemicals and supplies, Liquimix has its own colour-matching laboratory fitted with in-house testing and mixing capabilities. Read More

Key Features

  • High adhesion 14 MPa
  • Hardness 62 (Shore D)
  • Elongation 218%
  • Smooth and seamless easy-clean lining
  • Abrasion resistant
  • Will not flake, peel or blister

Specifications

MIX RATIO 1:1 with Graco high-pressure, heated, impingement-mix, equipment
PROCESSING TEMPERATURE 63-65C°
PROCESSING PRESSURE 2000-2500 psi
HARDNESS 62 (Shore D)
ELONGATION 150%
ABRASION 15 (mg lost)
TENSILE 21.6 (MPa)
TEAR > 12 (MPa)

Related ArtiCles

Introduction: The High Cost of Crumbling Joints In a busy warehouse or industrial facility, the floor is the foundation of your operations. Yet, the weakest point is often the most overlooked: the control and construction joints designed to manage concrete movement. Every time a hard-wheeled forklift or heavy pallet jack crosses a joint, the delicate […]

At Liquimix, our Tufflon-P90 and Tufflon-P80 polyurea coatings are both high-performance solutions but they're designed for different applications.
Sunlight, heat, and moisture cause millions of dollars of material damage every year. The QUV Accelerated Weather Tester is used to simulate outdoor and indoor sun exposure on protective coatings.

Related Case Studies

TUFFLON-D60 SL | CASE STUDY
The LiquiMix team was approached by a client seeking a protective coating system for their steel trailers that needed to facilitate the early release of bulk dry and slurry loads....
Read More

Related Products & Equipment

Want to improve your skills?

DIGITAL SERVICE LOG

AND PREVENTIVE MAINTENANCE PLAN
Start Learning

TRAINING COURSES

TO OPERATE & APPLY WITH THE MATERIAL
Start Learning

TECHNICAL SUPPORT

ON SITE ANYWHERE IN AUSTRALIA
Get Support

Can't find what you need?

Reach out to us – we’ve got you covered!

"*" indicates required fields