Tufflon-P90

With its high hardness and over 350% elongation, Tufflon-P90 pure polyurea exhibits high abrasion and corrosion resistance with exceptional adhesion to well-prepared surfaces.

Tufflon-P90

$665.13

Request A Quote

"*" indicates required fields

Name*

TUFFLON-P90 SPRAY POLYUREA ELASTOMER - 90 SHORE A HARDNESS

Spray Polyurea Elastomer – 90 Shore A Hardness. Used For Sealing And Protecting All Concrete Assets Including Drinking Water Reservoirs, Tanks, Secondary Containment (Bunds) And Industrial Flooring

Tufflon-P90 has a long and successful history of safely protecting the inside of dozens of concrete and steel drinking water municipal reservoirs throughout Australia. When used in conjunction with Civilox LV100 penetrating epoxy sealer and HB200 epoxy primer, Tufflon-P90 is certified safe for contact with drinking water to AS4020-2005. Finished with a smooth, continuous, cream-coloured, easy to clean surface and strongly bonded to the substrate, Tufflon-P90 has an expected 20+ year service life without blistering, debonding, cracking or flaking.

Made in Australia under ISO 9001, Tufflon-P90 has the history and credentials to offer the asset owner long-term protection for the inside surfaces of major municipal drinking water storage assets.

Tufflon-P90 has many other uses such as lining chemical storage bunds, animal enclosures, crocodile ponds, steel and aluminium tippers, rail cars, pipelines, sewerage treatment plants, petrol-station forecourts, fuel storage bunded areas, trafficable car decks etc.

AVAILABLE SIZING
425kg drum set
42.5kg pail set

 

Applications for Tufflon-P90

  • Potable water reservoirs
  • Potable water tanks
  • Chemical & Fuel storage bunds
  • Steel and aluminium tippers
  • Rail cars
  • Pipelines
  • Sewerage treatment plants
  • Service station forecourts
  • Trafficable car decks
  • Crocodile ponds

Need a custom colour?

As one of the only local manufacturers of Construction Chemicals and supplies, Liquimix has its own colour-matching laboratory fitted with in-house testing and mixing capabilities. Read More

Key Features

  • High hardness (Shore 90A)
  • Potable water approved
  • Prevents corrosion
  • Protects from chemical attack
  • Abrasion resistant
  • Permanently elastomeric
  • Smooth and seamless
  • Resistant to puncture

Specifications

MIX RATIO 1:1 with Graco high-pressure, heated, impingement-mix, equipment
HARDNESS 90 (Shore A)
ELONGATION 430%
ABRASION 58 (mg lost)
TENSILE 16 (MPa)
TEAR 9.6 (MPa)

Related ArtiCles

Introduction: The High Cost of Crumbling Joints In a busy warehouse or industrial facility, the floor is the foundation of your operations. Yet, the weakest point is often the most overlooked: the control and construction joints designed to manage concrete movement. Every time a hard-wheeled forklift or heavy pallet jack crosses a joint, the delicate […]

At Liquimix, our Tufflon-P90 and Tufflon-P80 polyurea coatings are both high-performance solutions but they're designed for different applications.
Sunlight, heat, and moisture cause millions of dollars of material damage every year. The QUV Accelerated Weather Tester is used to simulate outdoor and indoor sun exposure on protective coatings.

Related Case Studies

TUFFLON-P90 | CASE STUDY CS-007
The Asset required a protective & waterproof coating system applied to the exterior foundation of the newly constructed concrete building.
Read More
TUFFLON-P90 | CASE STUDY
The owner of a seafood processing factory needed the failed epoxy floor coating to be replaced in order to satisfy AQIS (Australian Quarantine and Inspection Service) requirements.
Read More
THICKENER TANK UPGRADE | TUFFLON P90 | CASE STUDY
Protective coatings are a simple yet effective way to prevent the corrosion of steel from proceeding by removing oxygen from the steel surface and preventing the oxidation of steel. If...
Read More
COPPER CONCENTRATE STORAGE TANK | TUFFLON P90 | CASE STUDY
Protective coatings are a simple yet effective way to prevent the corrosion of steel from proceeding by removing oxygen from the steel surface and preventing the oxidation of the steel....
Read More
Adhesion Testing of Rapid Set Membranes
The rapid-curing protective membranes based on polyurea, polyurethane or a blend (Hybrid) exhibit excellent adhesion to steel and concrete. Understanding the parameters for testing adhesion and the time restraints required for...
Read More

Related Products & Equipment

Want to improve your skills?

DIGITAL SERVICE LOG

AND PREVENTIVE MAINTENANCE PLAN
Start Learning

TRAINING COURSES

TO OPERATE & APPLY WITH THE MATERIAL
Start Learning

TECHNICAL SUPPORT

ON SITE ANYWHERE IN AUSTRALIA
Get Support

Can't find what you need?

Reach out to us – we’ve got you covered!

"*" indicates required fields