THIS PRODUCT HAS BEEN DISCONTINUED.
Recommended alternative : Aralox CRETE
Aralox-FL200 is a high viscosity 100% solids, coloured epoxy that allows high-film build applications. The Aralox-FL200 uses the same pigments as Aralox-FL170 and can use a variety of non-slip media to achieve a trafficable finish.
"*" indicates required fields
THIS PRODUCT HAS BEEN DISCONTINUED.
Recommended alternative : Aralox CRETE
100% solids, coloured, high-film build epoxy.
As one of the only local manufacturers of Construction Chemicals and supplies, Liquimix has its own colour-matching laboratory fitted with in-house testing and mixing capabilities. Read More
| Volume Solids | 100% |
| Theoretical Coverage | 5 Square meters / litre at 200 Microns DFT |
| Finish | Pigmented |
| Colour | Australian standard (AS2700) |
| Gloss | High |
| Mixing Ratio | 2:1 by volume |
| PotLife | 25 Min @ 25°C |
| Typical Thickness | 100 to 200 Microns DFT (100 to 200 Microns WFT) |
| Cleaner | LM1 Thinner |
| Flash Point | > 90°C |
| VOC | 0 Grams / Litre |
| Specific Gravity | 1.34 |
| Substrate Temp | Tacked | Hard Dry | FullCure | Minimum Recoat Time | Maximum Recoat Time |
| 5°C | 12 Hrs | 24 Hrs | 24 Hrs | 6 Days | |
| 10°C | 9 Hrs | 18 Hrs | 18 Hrs | 6 Days | |
| 15°C | 6 Hrs | 12 Hrs | 12 Hrs | 4 Days | |
| 25°C | 3 Hrs | 6 Hrs | 7-14 Days | 6 Hrs | 2 Day |
| 40°C | 1 Hr | 3 Hrs | 3 Hrs | 1 Day |
Introduction: The High Stakes of Secondary Containment in Australia Across Australia’s industrial landscapes—from chemical processing plants in Queensland to mining operations in Western Australia and wastewater facilities in Victoria—storing and processing hazardous materials carries immense responsibility. Concrete bunds, containment sumps, and processing floors act as the crucial last line of defense between aggressive industrial chemicals […]
BY GRACO EXPERTS
Enquire Now
AND PREVENTIVE MAINTENANCE PLAN
Start Learning
TO OPERATE & APPLY WITH THE MATERIAL
Start Learning
ON SITE ANYWHERE
IN AUSTRALIA
Get Support
Reach out to us – we’ve got you covered!
"*" indicates required fields
