Civilox-LV100 epoxy penetrates, strengthens and seals concrete surfaces. With a simple 1:1 mix ratio, this very low viscosity, 100% solids epoxy is the concrete sealer of choice for preventing pinholes from forming in polyurea linings. It cures fully at temperatures as low as 0°C and adheres strongly to damp and difficult substrates.
"*" indicates required fields
Civilox-LV100 can be applied by roller, brush or airless spray. Apply a thin coat and for best results avoid ponding. Speak to us about using a Graco XP70 plural spray unit for accurate mixing, zero waste and vastly increased productivity. Liquimix is a major Graco distributor and we can discuss purchase or hire.
Call Liquimix today on 1300 123 085 for more information about our range of epoxies, polyurea, aliphatic polyurea and polyaspartic.
As one of the only local manufacturers of Construction Chemicals and supplies, Liquimix has its own colour-matching laboratory fitted with in-house testing and mixing capabilities. Read More
| Volume Solids | 100% |
| Theoretical Coverage | 5m² / L (depending on concrete porosity) |
| Finish | Pigmented |
| Colour | Light Grey |
| Gloss | High Gloss |
| Mixing Ratio | 1:1 by volume |
| PotLife | 30 Min @ 25°C |
| Typical Thickness | 200 Microns wet to soak into concrete |
| Cleaner | LM1 Thinner |
| Flash Point | >180 °C |
| VOC | 0 Grams / Litre |
| Specific Gravity | 1.12 |
| Substrate Temp | Tacked | Hard Dry | FullCure | Minimum Recoat Time | Maximum Recoat Time |
| 5°C | 24 Hrs | 30 Hrs | 24 Hrs | 4 Days | |
| 15°C | 10 Hrs | 14 Hrs | 10 Hrs | 2 Days | |
| 25°C | 5 Hrs | 7 Hrs | 7-14 Days | 5 Hrs | 24 Days |
| 40°C | 2 Hrs | 3.5 Hrs | 2 Hrs | 12 Day |
BY GRACO EXPERTS
Enquire Now
AND PREVENTIVE MAINTENANCE PLAN
Start Learning
TO OPERATE & APPLY WITH THE MATERIAL
Start Learning
ON SITE ANYWHERE
IN AUSTRALIA
Get Support
Reach out to us – we’ve got you covered!
"*" indicates required fields
