Civilox-LV110 is a two-component, very low-viscosity, 100% solids epoxy resin designed for crack injection, sealing, and substrate consolidation.
"*" indicates required fields
Civilox-LV110 is a two-component, very low-viscosity, 100% solids epoxy resin designed for crack injection, sealing, and substrate consolidation. It penetrates fine cracks, pores, and voids in concrete and masonry to help restore strength and reduce the ingress of water, air, and contaminants. Once cured, it forms a rigid, high-strength bond and may also be mixed with clean, dry sand for epoxy repair mortar or rendering applications.
| Volume Solids | 100% |
| Theoretical Coverage | 5 Square meters / Litre (depending on concrete porosity) |
| Finish | Clear |
| Colour | Amber |
| Gloss | High Gloss |
| Mixing Ratio | 1:1 by volume |
| PotLife | 30 Min @ 25°C |
| Typical Thickness | 200 Microns wet to soak into concrete |
| Cleaner | LM1 Thinner |
| Flash Point | >180 °C |
| VOC | 0 Grams / Litre |
| Specific Gravity | 1.06 |
| Substrate Temp | Tacked | Hard Dry | FullCure | Minimum Recoat Time | Maximum Recoat Time |
| 5°C | 24 Hrs | 30 Hrs | 24 Hrs | 6 Days | |
| 15°C | 10 Hrs | 14 Hrs | 10 Hrs | 6 Days | |
| 25°C | 5 Hrs | 7 Hrs | 7-14 Days | 5 Hrs | 3 Days |
| 40°C | 2 Hrs | 3.5 Hrs | 2 Hrs | 1 Day |
BY GRACO EXPERTS
Enquire Now
AND PREVENTIVE MAINTENANCE PLAN
Start Learning
TO OPERATE & APPLY WITH THE MATERIAL
Start Learning
ON SITE ANYWHERE IN AUSTRALIA
Get Support
Reach out to us – we’ve got you covered!
"*" indicates required fields
