ColourTuff® is 100% colour stable, which means it will not turn yellow or change colour even when exposed to sunlight for long periods of time. It is highly abrasion-resistant and remains permanently elastomeric.
When you want a protective polyurea lining with all the advantages of Tufflon® but need it to be colourfast, then you’ll want to consider ColourTuff®. Such applications might include caravans and trucks, interiors and exteriors that require protection, sealing and resistance to abrasion, impact and corrosion.
SKU: 41Kg
"*" indicates required fields
LiquiMix’s range of Tufflon® and Elaston® pure polyurea are based on Aromatic chemistry and will change colour when exposed to UV. This has little effect on their long-term performance. Some colours change faster than others.
When colour change is not acceptable, such as flooring where the colour is a part of the design and aesthetics is important, then you will need an Aliphatic polyurea such as ColourTuff®. Easily processed through plural, airless equipment such as a Graco Reactor, ColourTuff® is the latest generation of Aliphatic Polyurea.
ColourTuff® has all the same properties of Tufflon® and Elaston® such as high elongation, extreme toughness and durability under harsh conditions. It is also resistant to many chemicals. ColourTuff® is relatively expensive and so it is typically applied as a topcoat over Tufflon® or Elaston® to give a system that is both beautiful, durable and cost-effective.
410kg Drum kit
41kg Pail kit
As one of the only local manufacturers of Construction Chemicals and supplies, Liquimix has its own colour-matching laboratory fitted with in-house testing and mixing capabilities. Read More
| Volume Solids | 100% |
| Theoretical Coverage | 0.33 Squaremeter / Litre @3000 Microns DFT |
| Finish | Pigmented |
| Colour | Various |
| Gloss | Semi-Gloss |
| Mixing Ratio | 1:1 by volume |
| Gel Time | 15-30 seconds |
| Typical Thickness | 3000 Microns Dry Film Thickness |
| Cleaner | Reactor Flush and Swell |
| VOC | 0 Grams / Litre |
| Specific Gravity | 1.05-1.08 (25°C) |
| Property | Method | Results |
| Pull-off adhesion value, concrete | ASTMD4541(20mm diameter dolly) | Concrete: > 2-5 Steel: > 6 |
| Elongation at 24°C | ASTMD 638 | >400% |
| Abrasion Resistance | ENISO5470-1, H22wheel@ 1,000 rpm with 1,000g weight | <33mg |
| Tensile Strength | ASTMD 638 | >16MPa |
| Hardness | ASTMD2240 Shore D | 40-45 |
Introduction: The High Cost of Crumbling Joints In a busy warehouse or industrial facility, the floor is the foundation of your operations. Yet, the weakest point is often the most overlooked: the control and construction joints designed to manage concrete movement. Every time a hard-wheeled forklift or heavy pallet jack crosses a joint, the delicate […]
BY GRACO EXPERTS
Enquire Now
AND PREVENTIVE MAINTENANCE PLAN
Start Learning
TO OPERATE & APPLY WITH THE MATERIAL
Start Learning
ON SITE ANYWHERE
IN AUSTRALIA
Get Support
Reach out to us – we’ve got you covered!
"*" indicates required fields
