Crackshot-130

Crackshot-130 stops water from leaking through cracks in concrete walls and into below-ground car parks, basements, tunnels, retaining walls, dam walls and other sites. It works by quickly reacting with water to expand into a tough, flexible and dense foam that blocks the leak permanently. The system involves drilling holes at an angle into the concrete to intersect the crack or joint at strategically located points.

Crackshot-130

Request A Quote

"*" indicates required fields

Name*

POLYURETHANE, CONCRETE CRACK INJECTION RESIN

Available : Crackshot-130 EC & Crackshot-130 EC Catalyst

A “packer” (seen protruding from the wall in the photo below) is then inserted and tightened into the hole. Crackshot-130 is pumped, under pressure, into the packer where it penetrates deep into the concrete to react with water and quickly expand to form a tough, long-lasting gel that stops leaks. Results are seen almost immediately.

Often it is impossible to get to the positive side of the wall to apply traditional waterproofing membranes. In such situations, if traditional waterproofing membranes are applied to the negative side to try and prevent leaks, the head and pressure of water can push them off. Because Crackshot-130 is injected into the structure of the concrete it can’t be pushed off and provides an effective and permanent solution.

Read the TDS and MSDS prior to use.

Crackshot-130 is made in Australia under ISO 9001 and is safe for use in contact with drinking water (complies with AS4020).

Key Features

  • Faster cure rate than Crackshot-150
  • Forms a tough, flexible and dense foam
  • Reacts with all types of water including sea water
  • MDI – safer to use
  • Uses a catalyst to speed reaction time
  • Low viscosity

Intended Uses

  • Sealing against water ingress
  • Sealing against leaking cracks and joints
  • Sealing against water in masonry and brickwork
  • Filling small voids
  • Back Grouting

Specifications

Catalyst % of Crackshot 130

EC by weight

5°C 15°C 25°C
Cream time Free Rise Time Cream time Free Rise Time Cream time Free Rise Time
2 57 Sec 338 Sec 51 Sec 306 Sec 35 Sec 242 Sec
6 30 Sec 205 Sec 23 Sec 174 Sec 18 Sec 160 Sec
10 23 Sec 153 Sec 18 Sec 121 Sec 16 Sec 101 Sec
Catalyst % of Crackshot 130

EC by weight

5°C 15°C 25°C
Expansion Rate Expansion Rate Expansion Rate
2 8 x 9 x 10 x
6 12 x 15 x 17 x
10 28 x 29 x 30 x

Related ArtiCles

High-performance PU Binder T1000 for strong and durable flooring solutions. Ideal for industrial and commercial applications.

Related Products & Equipment

Want to improve your skills?

DIGITAL SERVICE LOG

AND PREVENTIVE MAINTENANCE PLAN
Start Learning

TRAINING COURSES

TO OPERATE & APPLY WITH THE MATERIAL
Start Learning

TECHNICAL SUPPORT

ON SITE ANYWHERE IN AUSTRALIA
Get Support

Can't find what you need?

Reach out to us – we’ve got you covered!

"*" indicates required fields