Graco Fusion AP Mixing Chamber – AR2020

SKU: AR2020

The Graco Fusion AP Round Mixing Chamber is a genuine high-precision OEM component categorized as a “Size 000” Round Pattern Mixing Chamber. Positioned at the absolute core of the Graco Fusion AP Spray Gun, this chamber acts as the physical terminal junction where Part “A” (Isocyanate) and Part “B” (Resin) chemicals collide under intense hydraulic pressure.

Key Features

  • Ultra-Low Volume Delivery: Precision calibrated to size code “000”, delivering finer atomization and minimal material discharge to tightly manage overspray over thin target areas. 
  • Hardened Stainless Steel Engineering: Formed entirely from industrial-grade hardened stainless steel alloy to endure harsh chemical abrasives and continuous mechanical scraping during purging cycles.
  • Impingement Inversion Cleanliness: Designed dynamically to shift backward to spray and snap forward to purge air instantly. This maximizes clear airflow inside the nozzle tip to strip remaining residue out before it hardens. 

$553.30

Technical Specifications

Specification Details
Part Number AR2020
Size Code 000
Spray Pattern Geometry Round
Spray Pattern Width Approx. 5 in (127 mm) at 24 in from the target surface
Impingement Port Size 0.020 in (0.51 mm)
Nozzle Discharge Orifice 0.042 in (1.07 mm)
Maximum Foam Flow Capacity Approx. 3 lbs/min (1.36 kg/min) at 1,000 psi
Maximum Polyurea Flow Capacity Approx. 0.5 GPM at 2,000 psi
Maximum Working Fluid Pressure 3,500 psi (24.1 MPa / 241 bar)

Related Products & Equipment

Want to improve your skills?

DIGITAL SERVICE LOG

AND PREVENTIVE MAINTENANCE PLAN
Start Learning

TRAINING COURSES

TO OPERATE & APPLY WITH THE MATERIAL
Start Learning

TECHNICAL SUPPORT

ON SITE ANYWHERE IN AUSTRALIA
Get Support

Unsure what you need?

Answer 5 simple questions and get a recommendation on what you need.