Hard protective coating for cured foams. Spray foam is a fantastic medium for all sorts of applications, however it does need to be protected from impact, abrasion and general wear and tear. An application with LiquiMix hardcoat is ideal to finish off your foam project, extending its life and performance.
"*" indicates required fields
A two-part structural spray that forms a hard coat system designed for coating polystyrene or polyurethane foam in the production of both large and small scale structures to protect and strengthen.
As one of the only local manufacturers of Construction Chemicals and supplies, Liquimix has its own colour-matching laboratory fitted with in-house testing and mixing capabilities. Read More
| Volume Solids | 100% |
| Theoretical Coverage | 0.50㎡ / L@2000 Microns DFT |
| Finish | Pigmented |
| Colour | Grey |
| Gloss | High Gloss |
| Mixing Ratio | 1:1 by volume |
| Gel Time | 15-25 seconds |
| Typical Thickness | 2000 Microns Dry Film Thickness |
| Cleaner | Reactor Flush and Swell |
| Flash Point | >150°C |
| VOC | 0 Grams / Litre |
| Specific Gravity | 1.02 |
| Property | Method | Results |
| Elongation | ASTMD412-92 | 35% |
| Tensile Strength | ASTMD412-92 | 28 MPA |
| Hardness | ASTMD2240-91, Shore D | 69- 73 |
| Property | Hardcoat-D65 Part A | Hardcoat-D65 Part B |
| Appearance | Amber to Brown | Grey |
| Viscosity | 600- 1000cPs | 500- 900 cPs |
| Density | 1.23 | 1.10 |
BY GRACO EXPERTS
Enquire Now
AND PREVENTIVE MAINTENANCE PLAN
Start Learning
TO OPERATE & APPLY WITH THE MATERIAL
Start Learning
ON SITE ANYWHERE
IN AUSTRALIA
Get Support
Reach out to us – we’ve got you covered!
"*" indicates required fields
