Hybron®H90 is a two-component, fast-cure, hybrid polyurea. It is tough, elastomeric, and best suited for waterproofing purposes.
With a proven history of use, it is suitable for most waterproofing applications – due to its superior waterproofing qualities.
Intended uses of Hybron®H90 include applications in Car Parks, Terraces, Foundations and Retaining Walls, Plant Room Floors, External walls, and Wet areas, including around pools.
Made in Australia under ISO9001 and formulated specifically for Australian conditions.
"*" indicates required fields
The maximumHybron- H90recoat window is 20 minutes. Prior to commencing next day’s spraying the cold edge must be mechanically abraded to a minimum of 100 mm wide to reactivate the Hybron- H90 and give acceptable adhesion. Vacuum all grinding swarf as you go. The non-abraded, cured coating must be masked to prevent overspray and provide a neat edge of the new section
425kg Drum Kit
42.5L Pail Kit
As one of the only local manufacturers of Construction Chemicals and supplies, Liquimix has its own colour-matching laboratory fitted with in-house testing and mixing capabilities. Read More
| Volume Solids | 100% |
| Theoretical Coverage | 0.67 Square meter / Litre @1500 Microns DFT |
| Finish | Pigmented |
| Colour | Grey |
| Gloss | Semi-Gloss |
| Mixing Ratio | 1:1 by volume |
| Gel Time | 6 seconds |
| Typical Thickness | 1500 Microns Dry Film Thickness |
| Cleaner | Reactor Flush and Swell |
| Flash Point | >149°C |
| VOC | 0 Grams / Litre |
| Specific Gravity | 1.08 (21°C) |
| Property | Method | Results |
| Pull-off adhesion value, concrete | ASTMD4541(20mm diameter dolly) | > 1.5 MPa |
| Elongation at 24°C | ASTMD412-92 | > 350 % |
| Abrasion Resistance | ASTMc501-84, H18 wheel @ 1,000rpm with 1,000g weight
ASTMc501-84, CS17 wheel @ 1,000rpm with 1,000g weight |
90 mg
3 mg |
| Tensile Strength | ASTMD412-92 | 12- 15 MPa |
| Tear Strength | ASTMD624-86 | 50–55 N/mm |
| Hardness | ASTMD2240-91, Shore A
Shore D |
85- 90
– |
| Water Absorption | AS 3558.1 | < 1% |
| Water Vapour
Transmission |
E96-05 (B) | 0.18 g / (h.m2) 4.2 g /
(24h.m2) |
Introduction: The High Cost of Crumbling Joints In a busy warehouse or industrial facility, the floor is the foundation of your operations. Yet, the weakest point is often the most overlooked: the control and construction joints designed to manage concrete movement. Every time a hard-wheeled forklift or heavy pallet jack crosses a joint, the delicate […]
BY GRACO EXPERTS
Enquire Now
AND PREVENTIVE MAINTENANCE PLAN
Start Learning
TO OPERATE & APPLY WITH THE MATERIAL
Start Learning
ON SITE ANYWHERE
IN AUSTRALIA
Get Support
Reach out to us – we’ve got you covered!
"*" indicates required fields
