Hybron®-W90 is a 100% solids polyurea / polyurethane hybrid spray elastomer with outstanding abrasion resistance and strong adhesion to both steel and concrete. It is produced to be more competitively priced than pure polyurea for specific markets.
With a proven history of use it is suitable for some applications – especially due to its superior abrasion resistance.
It must be noted that Hybron® does have its limitations and is not recommended for most applications, particularly those in the water industry, tank lining and permanent immersion. Contact LiquiMix to discuss your project to determine the right product and methodology.
Made in Australia under ISO9001 and formulated specifically for Australian conditions.
$572.90
"*" indicates required fields
SIZING AVAILABLE
425kg Drum Kit
42.5L Pail Kit
As one of the only local manufacturers of Construction Chemicals and supplies, Liquimix has its own colour-matching laboratory fitted with in-house testing and mixing capabilities. Read More
| MIX RATIO | 1:1 with high or low pressure equipment |
| HARDNESS | 90 (Shore A) |
| ELONGATION | 450% |
| ABRASION | 11 (mg lost) ASTM D4060-10 Taber (CS-17, 1,000g, 1,000 cycle) |
| TENSILE | 18.6 (MPa) ASTM D412-06ae2 |
| TEAR | 9.6 (MPa) |
| PUNCTURE | 54.4 (kgf) CNS 14263-(1998) Test index of puncture resistance |
Introduction: The High Cost of Crumbling Joints In a busy warehouse or industrial facility, the floor is the foundation of your operations. Yet, the weakest point is often the most overlooked: the control and construction joints designed to manage concrete movement. Every time a hard-wheeled forklift or heavy pallet jack crosses a joint, the delicate […]
BY GRACO EXPERTS
Enquire Now
AND PREVENTIVE MAINTENANCE PLAN
Start Learning
TO OPERATE & APPLY WITH THE MATERIAL
Start Learning
ON SITE ANYWHERE
IN AUSTRALIA
Get Support
Reach out to us – we’ve got you covered!
"*" indicates required fields
