LiquiBond is a single component, 100% solids, low viscosity, moisture-cure, modified polyurethane designed to stabilise and bind the surface of loose substrates such as roadbase CBR45 or CBR80 or similar. It can be sprayed or poured onto various surfaces where it penetrates deep into the substrate. After a 24 hour curing period, the top few mm of the substrate is stabilised to form a tough, flexible, surface that will accept overcoating with bitumen, asphalt or Tufflon polyurea.
"*" indicates required fields
Liquibond-WP is a Polyurethane and Polyurea Membrane Adhesive. Liquibond-WP is a 100% solids, single-packMDI-based polyurethane designed for adhering waterproofing membranes to a wide variety of substrates including PIR foam, PUR foam, Epoxy primer, Concrete and Timber.
| Volume Solids | 100% |
| Theoretical Coverage | 5-10m² / L |
| Viscosity | 2500-3500 cPs @ 25℃ |
| System | Modified MDI |
| Appearance | Brown Liquid |
| Mixing Ratio | Single Pack |
| Potlife | >1Hour @25℃ |
| Typical Thickness | 200 Microns |
| Cleaner | LM1 Thinner |
| Flash Point | 225℃ |
| VOC | Low VOC |
| Specific Gravity | 1.14 |
BY GRACO EXPERTS
Enquire Now
AND PREVENTIVE MAINTENANCE PLAN
Start Learning
TO OPERATE & APPLY WITH THE MATERIAL
Start Learning
ON SITE ANYWHERE
IN AUSTRALIA
Get Support
Reach out to us – we’ve got you covered!
"*" indicates required fields
