Metalox®Etch is a one component, low build, 10% solids polyvinyl butyral self-etching coating designed to promote adhesion to ferrous, non ferrous, galvanising, stainless steel, aluminum and fibreglass.
"*" indicates required fields
A one component, ow build, 10% solids poly vinyl butyral self etching coating designed to promote adhesion to ferrous, non ferrous, galvanising, stainless steel, aluminium and fibre glass.
| Volume Solids | 100% |
| Theoretical Coverage | 10 Square meters / Litre at 10 Microns DFT |
| Finish | Pigmented |
| Colour | Grey |
| Gloss | Satin |
| Mixing Ratio | Single Pack |
| PotLife | 1 Hrs @25°C |
| Typical Thickness | 5 to 10 Microns DFT (50 to 100 Microns WFT) |
| Cleaner | LM1 Thinner |
| Flash Point | <10°C |
| VOC | 740 g/L |
| Specific Gravity | 0.90 |
| Substrate Temp | Tacked | HardDry | Minimum RecoatTime | MaximumSelfRecoat Time |
| 5°C | 20 Mins | 16 Hrs | 8 Hrs | 1 Day |
| 10°C | 15 Mins | 12 Hrs | 6 Hrs | 1 Day |
| 15°C | 10 Mins | 8 Hrs | 4 Hrs | 1 Day |
| 25°C | 5 Mins | 4 Hrs | 2 Hrs | 1 Day |
| 40°C | 2 Mins | 2 Hrs | 1 Hr | 1 Day |
Introduction: The High Stakes of Secondary Containment in Australia Across Australia’s industrial landscapes—from chemical processing plants in Queensland to mining operations in Western Australia and wastewater facilities in Victoria—storing and processing hazardous materials carries immense responsibility. Concrete bunds, containment sumps, and processing floors act as the crucial last line of defense between aggressive industrial chemicals […]
BY GRACO EXPERTS
Enquire Now
AND PREVENTIVE MAINTENANCE PLAN
Start Learning
TO OPERATE & APPLY WITH THE MATERIAL
Start Learning
ON SITE ANYWHERE
IN AUSTRALIA
Get Support
Reach out to us – we’ve got you covered!
"*" indicates required fields
