Metalox-P2 is a two component, low build, 50% solids polyurethane, designed for steel surfaces in atmospheric exposure. Metalox-P2 has outstanding water and anti-corrosion resistance. Metalox-P2 will cure at a low temperature.
Price range: $136.58 through $471.66
"*" indicates required fields
Metalox-P2 is a two component, low build, 50% solids polyurethane, designed for steel surfaces in atmospheric exposure. Metalox-P2 has outstanding water and anti-corrosion resistance. Metalox-P2 will cure at a low temperature.
As one of the only local manufacturers of Construction Chemicals and supplies, Liquimix has its own colour-matching laboratory fitted with in-house testing and mixing capabilities. Read More
| Volume Solids | 50% |
| Theoretical Coverage | 10 Square meters / Litre at 50 Microns DFT |
| Finish | Pigmented |
| Colour | Grey |
| Gloss | Semi-Gloss |
| Mixing Ratio | 4:1 by volume |
| Pot Life | 2.5 Hrs @25°C |
| Typical Thickness | 25 to 38 Microns DFT (50 to 75 Microns WFT) |
| Cleaner | LM1 Thinner |
| Flash Point | >26°C |
| VOC | 415 Grams / Litre |
| Specific Gravity | 1.30 |
| Substrate Temp | Tacked | Hard Dry Note 1 | Minimum Recoat Time | MaximumSelfRecoat TimeNote2 |
| 5°C | 8 Hrs | 24 Hrs | 8 Hrs | 2 Days |
| 10°C | 6 Hrs | 18 Hrs | 6 Hrs | 2 Days |
| 15°C | 4 Hrs | 12 Hrs | 4 Hrs | 2 Days |
| 25°C | 2 Hrs | 6 Hrs | 2 Hrs | 2 Days |
| 40°C | 1 Hr | 3 Hrs | 1 Hr | 1 Day |
Hardcoat-D65 helps turn shaped polystyrene foam into a finished form with a hard protective outer coating. Liquimix provides the chemical system, suitable spray equipment, applicator training and technical support What Is Hardcoat-D65 Polyurethane Hardcoat? Hardcoat-D65 is a two-component, rapid-curing, solventless and spray-applied aromatic polyurethane protective coating designed for use over suitable polyurethane foam and expanded […]
BY GRACO EXPERTS
Enquire Now
AND PREVENTIVE MAINTENANCE PLAN
Start Learning
TO OPERATE & APPLY WITH THE MATERIAL
Start Learning
ON SITE ANYWHERE
IN AUSTRALIA
Get Support
Reach out to us – we’ve got you covered!
"*" indicates required fields
