Opalon – M45 is a 54% volume solids elastomeric, clear, matt polyaspartic coating that will not yellow, is tough, fast-curing and quickly trafficable. It is normally applied over Opalon – F45 Gloss or coloured polyaspartic coating to produce a beautiful, durable lower gloss finish. Opalon – M45 Matt bridges hairline cracks and absorbs subtle movement in the substrate. Opalon – M45 Matt is used where a matt finish is desired.
Note for DIY Applicators: This product requires a primer coat (Opalon F45). Do not use the product by itself on porous surfaces.
Price range: $252.89 through $919.60
"*" indicates required fields
Opalon-M45 is a 54% volume solids elastomeric, clear, matt polyaspartic coating that will not yellow, is tough, fast-curing and quickly trafficable. It is normally applied over Opalon F45 Gloss or coloured polyaspartic coating to produce a beautiful, durable lower gloss finish. Opalon-M45 bridges hairline cracks and absorbs subtle movement in the substrate. Opalon-M45 is used where a matt finish is desired.
| Volume Solids | 54% |
| Theoretical Coverage | 6.9 Square meter/Litre |
| Finish | Clear |
| Colour | None |
| Gloss | Matt |
| Mixing Ratio | 4:1 by volume |
| PotLife | 60 Min @25°C (100mls mix) |
| Typical Thickness | 75 Microns Dry Film Thickness or 144 Microns Wet |
| Cleaner | LM1 Thinner |
| VOC | 420 Grams / Litre |
| Specific Gravity | 1.02 |
| Substrate Temp | Touch Dry | Hard Dry | FullCure | Minimum Recoat Time | Maximum Recoat Time |
| 10°C | 5 Hrs | 12 Hrs | 12 Hrs | 36 Hrs | |
| 15°C | 3 Hrs | 8 Hrs | 8 Hrs | 36 Hrs | |
| 25°C | 1.5 Hrs | 4 Hrs | 3 Days | 4 Hrs | 24 Hrs |
| 40°C | 45 Min | 2 Hrs | 2 Hrs | 10 Hrs |
BY GRACO EXPERTS
Enquire Now
AND PREVENTIVE MAINTENANCE PLAN
Start Learning
TO OPERATE & APPLY WITH THE MATERIAL
Start Learning
ON SITE ANYWHERE
IN AUSTRALIA
Get Support
Reach out to us – we’ve got you covered!
"*" indicates required fields
