Opalon – S30 is a very high 80% volume solids elastomeric, glossy coloured polyaspartic coating that is tough, fast curing and low VOC. It is normally applied over Liquimix epoxy coatings, polyurethane sealers or other polyaspartic coatings to produce a beautiful, durable, decorative UV resistant topcoat.
Price range: $699.33 through $1,192.45
"*" indicates required fields
Opalon-S30 is a very high 80% volume solids, glossy coloured polyaspartic coating that is tough, fast curing and low VOC. It is normally applied over Liquimix epoxy primers or polyurethane sealers to produce a beautiful, durable glossy finish.
RECOMMENDED SYSTEM – SOLID GLOSS FINISH
RECOMMENDED SYSTEM – Flake Gloss Finish
RECOMMENDED SYSTEM – Flake Matt Finish
As one of the only local manufacturers of Construction Chemicals and supplies, Liquimix has its own colour-matching laboratory fitted with in-house testing and mixing capabilities. Read More
| Volume Solids | 80% |
| Theoretical Coverage | 11 Square meters / litre at 75 Microns DFT |
| Finish | Pigmented & Coloured |
| Colour | Australian standard (AS2700) + Clear Finish |
| Gloss | Glossy |
| Mixing Ratio | 2:1 by volume |
| PotLife | 45 Min @ 25°C |
| Typical Thickness | 50 – 100 Microns Dry or 63 – 125 Microns Wet |
| Thinner | Thinner LM5 Slow (Retarder Thinner) |
| Cleaner | Thinner LM1 |
| Flash Point | 27°C |
| VOC | 183 – 202 Grams / Litre (depending on colour) |
| Specific Gravity | 1.44 |
| Substrate Temp | Touch Dry | Hard Dry | FullCure | Minimum Recoat Time | Maximum Recoat Time |
| 10°C | 10Hrs | 20 Hrs | 12 Days | 20 Hrs | 20 Hrs |
| 15°C | 6 Hrs | 14 Hrs | 6 Days | 14 Hrs | 14 Hrs |
| 25°C | 3 Hrs | 7 Hrs | 3 Days | 2 Hrs | 7 Hrs |
| 40°C | 1 Hr | 2 Hrs | 1 Day | 2 Hrs | 2 Hrs |
BY GRACO EXPERTS
Enquire Now
AND PREVENTIVE MAINTENANCE PLAN
Start Learning
TO OPERATE & APPLY WITH THE MATERIAL
Start Learning
ON SITE ANYWHERE
IN AUSTRALIA
Get Support
Reach out to us – we’ve got you covered!
"*" indicates required fields
