Opalon-S45 is a 54% volume solids elastomeric, clear polyaspartic coating designed to remain clear without yellowing. It offers exceptional durability, fast curing, and quick trafficability. Typically applied over Opalon-F45 Gloss or coloured polyaspartic coatings, it achieves a stunning, long-lasting satin finish. Opalon-S45 effectively bridges hairline cracks and accommodates slight movements in the substrate.
Note for DIY Applicators: This product requires a primer coat (Opalon F45). Do not use the product by itself on porous surfaces.
Price range: $208.12 through $1,186.28
"*" indicates required fields
This product is ideal when a satin finish is desired, offering a balanced sheen that enhances the surface’s overall aesthetic.
| Volume Solids | 54% |
| Theoretical Coverage | 6.9 Square meter / Litre |
| Finish | Clear |
| Colour | None |
| Gloss | Satin |
| Mixing Ratio | 4:1 by volume |
| PotLife | 60 Min @ 25 °C (100mls mix) |
| Typical Thickness | 75 Microns Dry Film Thickness or 144 Microns Wet |
| Cleaner | LM1 Thinner |
| VOC | 420 Grams/Litre |
| Specific Gravity | 1.02 |
| Substrate Temp | Touch Dry | Hard Dry | FullCure | Minimum Recoat Time | Maximum Recoat Time |
| 10°C | 5 Hrs | 12 Hrs | 12 Hrs | 36 Hrs | |
| 15°C | 3 Hrs | 8 Hrs | 8 Hrs | 36 Hrs | |
| 25°C | 1.5 Hrs | 4 Hrs | 3 Days | 4 Hrs | 24 Hrs |
| 40°C | 45 Min | 2 Hrs | 2 Hrs | 10 Hrs |
BY GRACO EXPERTS
Enquire Now
AND PREVENTIVE MAINTENANCE PLAN
Start Learning
TO OPERATE & APPLY WITH THE MATERIAL
Start Learning
ON SITE ANYWHERE
IN AUSTRALIA
Get Support
Reach out to us – we’ve got you covered!
"*" indicates required fields
