Tufflon-P80 is a two-component, spray-applied, pure-polyurea elastomer coating that is softer than both Tufflon-P90 and Tufflon-D60 and exhibits less shrinkage and faster development of full strength. This faster development of physical properties (particularly tear strength) makes it more suitable for use in colder climates.
$665.13
"*" indicates required fields
Of the Tufflon range, Tufflon-P80 has the longest history of use throughout Australia and New Zealand and exhibits a uniform and even spray pattern when applied through Graco Reactor equipment and Fusion gun.
Most polyurea products shrink by about 1% within the first 30 minutes of application and take up to 8 hours to develop high strength. Tufflon-P80 shrinks by only 0.5% and toughens up much faster, making it particularly suitable for use on substrates with high expected movement within the first 8 hours of application such as geofabric and rooftop expansion joints. Where other polyureas can be torn apart, Tufflon-P80 withstands the stresses involved during the initial shriking on geofabric and expansion joints.
As one of the only local manufacturers of Construction Chemicals and supplies, Liquimix has its own colour-matching laboratory fitted with in-house testing and mixing capabilities. Read More
| MIX RATIO | 1:1 with Graco high-pressure, heated, impingement-mix, equipment |
| HARDNESS | 80 (Shore A) |
| ELONGATION | 427% |
| ABRASION | 50 (mg lost) |
| TENSILE | 16.5 (MPa) |
| TEAR | 4.9 (MPa) |
Introduction: The High Cost of Crumbling Joints In a busy warehouse or industrial facility, the floor is the foundation of your operations. Yet, the weakest point is often the most overlooked: the control and construction joints designed to manage concrete movement. Every time a hard-wheeled forklift or heavy pallet jack crosses a joint, the delicate […]
BY GRACO EXPERTS
Enquire Now
AND PREVENTIVE MAINTENANCE PLAN
Start Learning
TO OPERATE & APPLY WITH THE MATERIAL
Start Learning
ON SITE ANYWHERE
IN AUSTRALIA
Get Support
Reach out to us – we’ve got you covered!
"*" indicates required fields
