Tufflon P90 AS – Antistatic Polyurea

Tufflon P90 AS is an antistatic polyurea coating that has been independently tested by Mine Safety Technology to AS 1334.9-1982. Tufflon P90 AS is suitable as a heavy-duty protective lining for applications such as mine sites, mining operations, flammable liquid storage bunds or explosives storage areas where static energy poses a risk of spark.

Tufflon P90 AS – Antistatic Polyurea

Request A Quote

"*" indicates required fields

Name*

Antistatic Polyurea

Tufflon P90 AS exhibits medium hardness, permanent elasticity, corrosion, abrasion and chemical resistance. Only experienced applicators should apply this product using specialised plural, high-pressure, heated, airless, impingement-mix spray equipment.

This two-component, 100% solids, spray-applied, elastomeric protective coating is solvent-free making it safe for use in hazardous and confined spaces.

Applications for Tufflon P90 AS – Antistatic Polyurea

  • Applications for Tufflon P90 AS – Antistatic Polyurea
  • Anti-Static lining for areas containing explosives
  • Flammable liquids and fuel secondary containment bunds
  • Protective coating for hazardous environments

SIZES AVAILABLE

425kg Drum kit
42.5kg Pail kit

Need a custom colour?

As one of the only local manufacturers of Construction Chemicals and supplies, Liquimix has its own colour-matching laboratory fitted with in-house testing and mixing capabilities. Read More

Key Features

  • Anti-Static
  • High resistance to chemicals
  • Contains no volatile or flammable solvents or catalyst
  • Remains permanently elastomeric
  • Withstands temperatures up to 120°C
  • Application not affected by temperature or moisture
  • Resistant to puncture
  • Will not flake, peel or crack

Specifications

Volume Solids 100%
Theoretical Coverage 0.33 Squaremeter / Litre @3000 Microns DFT
Finish Pigmented
Colour Blue
Gloss Semi-Gloss
Mixing Ratio 1:1 by volume
Gel Time 5 seconds
Typical Thickness 3000 Microns Dry Film Thickness
Cleaner Reactor Flush and Swell for cured product
Flash Point >149°C
VOC 0 Grams / Litre
Specific Gravity 1.06

ENGINEERING DATA

Property Method Results
Elongation at 24°C ASTMD412-92 >350%
Abrasion Resistance ASTMc501-84, 1,000rpm with

1,000g weight, H18 wheel CS17 wheel

 

90mg

3.1mg

Electrical Resistance AS1334.9-1982 Shiny surface

AS1334.9-1982 Dull surface

169M

145M

Tensile Strength ASTMD412-92 15 MPa
Tear Strength ASTMD624-86 80- 85 N/mm
Hardness ASTM D 2240-91, Shore A Shore D 90- 92

40- 42

Water Absorption AS3558.1 <1%
Water Vapour Transmission E96-05(B) 0.09 g / (h.m2)

2.11 g / (24h.m2)

 

Related ArtiCles

Introduction: The High Cost of Crumbling Joints In a busy warehouse or industrial facility, the floor is the foundation of your operations. Yet, the weakest point is often the most overlooked: the control and construction joints designed to manage concrete movement. Every time a hard-wheeled forklift or heavy pallet jack crosses a joint, the delicate […]

At Liquimix, our Tufflon-P90 and Tufflon-P80 polyurea coatings are both high-performance solutions but they're designed for different applications.
Sunlight, heat, and moisture cause millions of dollars of material damage every year. The QUV Accelerated Weather Tester is used to simulate outdoor and indoor sun exposure on protective coatings.

Related Products & Equipment

Want to improve your skills?

DIGITAL SERVICE LOG

AND PREVENTIVE MAINTENANCE PLAN
Start Learning

TRAINING COURSES

TO OPERATE & APPLY WITH THE MATERIAL
Start Learning

TECHNICAL SUPPORT

ON SITE ANYWHERE IN AUSTRALIA
Get Support

Can't find what you need?

Reach out to us – we’ve got you covered!

"*" indicates required fields