Wetproof is a single-component, water-based, polyurethane-modified, waterproofing membrane. Wetproof has high elasticity, durability and flexibility.
Wetproof passes all of the requirements of AS/NZS 4858:2004 Class III for Interior Waterproofing.
$240.90
"*" indicates required fields
Standard Compliance of Wetproof
As one of the only local manufacturers of Construction Chemicals and supplies, Liquimix has its own colour-matching laboratory fitted with in-house testing and mixing capabilities. Read More
| Volume Solids | 60% |
| Theoretical Coverage | 1.25 Square metre /Litre @800Microns WFT (1 Kg per m²) |
| Finish | Clear Finish |
| Colour | Clear |
| Gloss | Matte |
| Mixing Ratio | Single Pack |
| Potlife | 2 Hours |
| Typical Thickness | 500 Microns Dry Film Thickness |
| Cleaner | Water and Swell (See Clean up in Application section) |
| Flash Point | >149°C |
| VOC | 0 Grams / Litre |
| Specific Gravity | 1.26 (25°C) |
| Property | Method | Results |
| Hardness Shore A | ASTMD2240 | 50- 60 |
| Pull-off adhesion value, concrete | ASTMD4541 (20mm diameter dolly) | >1.5MPa |
| Elongation at 24°C | ASTMD412-92 | > 500 % |
| Tear Strength | ASTMD624-86 | 8- 12N/mm |
| Minimum Recovery | ASTMF36-15(2021) | 90 % |
| Moisture Vapour Transmission | ASTME96 | Pass |
BY GRACO EXPERTS
Enquire Now
AND PREVENTIVE MAINTENANCE PLAN
Start Learning
TO OPERATE & APPLY WITH THE MATERIAL
Start Learning
ON SITE ANYWHERE
IN AUSTRALIA
Get Support
Reach out to us – we’ve got you covered!
"*" indicates required fields
