Elaston-W80 & Graco E-10hp…”A Perfect Partnership”

Waterproofers have tradionally relied on various forms of applied membranes to contain moisture. Products such as torch-on bitumen, modified bitumen, acrylic emulsion, polyurethane emulsion, liquid rubber, polyester resin and fibreglass and many other types of membrane have been widely used. Many of these products work well but there is a revolution going on in the world and its called POLYUREA.

Elaston-W80 teams up with REACTOR E-10hp

Elaston-W80 Polyurea is…quite simply…tougher than any other membrane on the market. It is quick to apply and sets in seconds to form a thick, seamless and continuous lining that has a vice-like grip to almost any well prepared surace. It can be applied to vertical surfaces without dripping or running and is highly elastic with over 400% elongation which means it can stretch to accommodate movement in the substrate without splitting or cracking.

Now with Graco’s newly released Reactor E-10hp, waterproofers have an economical and superior alternative to traditional membranes. The amazing E-10hp can easily be wheeled through doorways, into lifts, down hallways and into bathrooms. All it requires is 240v and a small portable air compressor. Fitted with a Fusion-AP gun and AW2222 mix chamber and up to 33m of insulated hose, access to almost any area is simple and easy. When fitted with the correct spray nozzle there is no overspray and no fumes as polyurea is a 100% solids product and contains no solvents or VOC’s. Elaston polyurea is made in Australia under ISO9001 by one of the world’s largest chemical suppliers and is a pure-polyurea by definition of the PDA. Each batch is tested for quality and a sample retained for future reference.

Since 2001 Elaston-W80 has been used on many thousands of square meters of waterproofing and is now teaming up with the newly released Graco E-10hp to deliver safe, affordable and fast spray applied linings. Liquimix is changing the face of waterproofing by forcing prices down while offering outstanding value and state-of-the-art systems. We offer our customers full training in the use of the equipment and products and remain committed to working with you 24/7 on projects. As a leading authorised Graco Distributor and service centre with factory trained technicians, we can promise our customers 100% commitment and ongoing support for the total system of Elaston-W80, accessories, repairs and the latest tips and tricks.


SDS – Elaston-W80 Part A

MSDS_ElastonW80_PtB – updated

AS 4858-2004 CSIRO Certificate

Call us now on 07 3277 6655 and speak to one of our friendly staff about Elaston-W80 and the E-10hp

Units available for demonstration at our Rocklea premises


Taking orders now for the next batch of E-10hp units coming in direct from the USA


Or…Fill out the contact form and we’ll get back to you!