LiquiBond is a single component, 100% solids, low viscosity, moisture-cure, modified polyurethane designed to stabilise and bind the surface of loose substrates such as roadbase CBR45 or CBR80 or similar. It can be sprayed or poured onto various surfaces where it penetrates deep into the substrate. After a 24 hour curing period, the top few mm of the substrate is stabilised to form a tough, flexible, surface that will accept overcoating with bitumen, asphalt or Tufflon polyurea.

 

APPLICATIONS FOR LIQUIBOND
Stabilising road base
Can be used on other substrates
Can be used underneath Tufflon® or Hybron® with good adhesion

 

Liquibond Road Base Stabiliser